Page 25 of 42

Re: BOB Bugs

Posted: Mon Oct 27, 2008 2:42 am
by yeti_c
evilweasel8 wrote:Fair enough I guess I can't really trust that the points are accurate, right now my points are 1222, the last time i looked they were at 1308, i lost 3 assassin speed games, two at a cost of 16 points and one at 17, total of 49 and also lost a terminator regular game at a cost of 17 bringing my total to 66--, 1308 less 66 is 1242 but like i said my score is 1222, twenty points m.i.a with not being eliminated in any other games at all, and this is the third time i noticed this in the last couple of weeks, the only thing i can think of is once the games are being archived after 5 days i am some how still being penalized somehow, never the less i am discouraged to keep playing over this because i know i am not seeing things and do my home work like writing my points down at the end of any session and note my games history and active games to make sure my facts are right.


If this is so - I would suggest posting it in the Suggestions & Bugs forum - as it wouldn't be a BOB problem - but a site problem.

C.

Re: BOB Bugs

Posted: Tue Oct 28, 2008 6:26 am
by evilweasel8
Will do, thanks

Re: BOB Bugs

Posted: Wed Oct 29, 2008 12:37 am
by Padrev
Padrev wrote:Hey all,

Trying to install BOB and it seems the userscripts.org website is down. Is there another source for this script?

Thanks.


..soo.. does anyone know where else I can download BOB from?

Re: BOB Bugs

Posted: Wed Oct 29, 2008 1:14 am
by yowzer14
Padrev wrote:
Padrev wrote:Hey all,

Trying to install BOB and it seems the userscripts.org website is down. Is there another source for this script?

Thanks.


..soo.. does anyone know where else I can download BOB from?

Appears to be up as far as I can tell.

Re: BOB Bugs

Posted: Fri Oct 31, 2008 3:52 pm
by Dominator7
yowzer14 wrote:
Dominator7 wrote:Where are these line - codes to be adjusted?
kinda lost

Those are the relative line numbers in the Greasemonkey javascript of BOB to be modified.

I cannot find where to make these adjustments, only thing I am finding is user scripts that open in Word and line 3336 desn't say anything similar.

Please advise

Re: BOB Bugs

Posted: Fri Oct 31, 2008 10:43 pm
by yowzer14
Dominator7 wrote:
yowzer14 wrote:
Dominator7 wrote:Where are these line - codes to be adjusted?
kinda lost

Those are the relative line numbers in the Greasemonkey javascript of BOB to be modified.

I cannot find where to make these adjustments, only thing I am finding is user scripts that open in Word and line 3336 desn't say anything similar.

Please advise

Don't use Word to edit those, just use notepad and search for the FROM code and replace it with the TO code.

Re: BOB Bugs

Posted: Sat Nov 01, 2008 9:01 am
by cheekbones3
I've got issues with BOB. Ever since I got the latest update, it just sticks at "Creating Statistics Table", and is greyed out, so I can't do anything with it until I turn it off. This is a sort of improvement from the last version which appeared to give some very strange numbers, although it worked at least.

Re: BOB Bugs

Posted: Sat Nov 01, 2008 9:36 am
by Dominator7
yowzer14 wrote:
Dominator7 wrote:
yowzer14 wrote:
Dominator7 wrote:Where are these line - codes to be adjusted?
kinda lost

Those are the relative line numbers in the Greasemonkey javascript of BOB to be modified.

I cannot find where to make these adjustments, only thing I am finding is user scripts that open in Word and line 3336 desn't say anything similar.

Please advise

Don't use Word to edit those, just use notepad and search for the FROM code and replace it with the TO code.

It doesn't give me the option, it just opens in Word when I hit the edit button.

Re: BOB Bugs

Posted: Sat Nov 01, 2008 12:41 pm
by yowzer14
Dominator7 wrote:
yowzer14 wrote:
Dominator7 wrote:
yowzer14 wrote:
Dominator7 wrote:Where are these line - codes to be adjusted?
kinda lost

Those are the relative line numbers in the Greasemonkey javascript of BOB to be modified.

I cannot find where to make these adjustments, only thing I am finding is user scripts that open in Word and line 3336 desn't say anything similar.

Please advise

Don't use Word to edit those, just use notepad and search for the FROM code and replace it with the TO code.

It doesn't give me the option, it just opens in Word when I hit the edit button.

Check this message I wrote regarding editing.
viewtopic.php?f=59&t=33227&p=1559242&hilit=notepad#p1559242

Re: BOB Bugs

Posted: Sat Nov 01, 2008 5:11 pm
by Dominator7
Thanks yowzer, that did it and I am finally fixed =D> =D> =D> =D> =D> =D> =D> =D> =D>

had to do ti a little differntly, could not find notepad, but found wordpad, still couldn't find the line numbers, so copied your code and did a search for: within the doc and finally found the two lines

Re: BOB Bugs

Posted: Sat Nov 01, 2008 6:49 pm
by yowzer14
Dominator7 wrote:Thanks yowzer, that did it and I am finally fixed =D> =D> =D> =D> =D> =D> =D> =D> =D>

had to do ti a little differntly, could not find notepad, but found wordpad, still couldn't find the line numbers, so copied your code and did a search for: within the doc and finally found the two lines

Excellent, glad it helped.

Re: BOB Bugs

Posted: Mon Nov 03, 2008 2:36 pm
by xmaveric
Just finished a King of the Hill game, and at the bottom under elimination summary it says:

Points Totals
xmaveric scored NaN points in this game
vaderisone scored NaN points in this game
BaseDeltaZero scored NaN points in this game
CarboniteHan scored NaN points in this game


Also, why even have points totals under elimination summary when they are also under the game log?

Re: BOB Bugs

Posted: Mon Nov 03, 2008 4:41 pm
by lancehoch
xmaveric wrote:Also, why even have points totals under elimination summary when they are also under the game log?

For terminator games.

Re: BOB Bugs

Posted: Tue Nov 04, 2008 10:10 am
by yeti_c
VERSION : 4.7.1

NEW FEATURES : Auto BOB

Defaults to On - but if set to Off - doesnt start BOB on load of every game.
To Load BOB click "Start BOB" in the top right hand corner (where you can change the map size/colourblind & refresh)

FIXED :

Neutral Elminations breaking log parsing.
Terminology of Column Headings (Please tell me if I've missed any)
NaN Score Summary errors (thanks yowzer)

Re: BOB Bugs

Posted: Tue Nov 04, 2008 12:40 pm
by tabsnake
on the Statistics section all the information is highlighted in each individual persons color and makes it very difficult to read. So for example the red person has the hole line highlighted in red, green is highlighted in green, and so on. How do I get this to turn off so just the text is the persons color and the line is not highligted in the persons color? Please let me know.

thank you

Re: BOB Bugs

Posted: Tue Nov 04, 2008 1:08 pm
by cheekbones3
cheekbones3 wrote:I've got issues with BOB. Ever since I got the latest update, it just sticks at "Creating Statistics Table", and is greyed out, so I can't do anything with it until I turn it off. This is a sort of improvement from the last version which appeared to give some very strange numbers, although it worked at least.


*bump*

Re: BOB Bugs

Posted: Tue Nov 04, 2008 1:09 pm
by cheekbones3
cheekbones3 wrote:I've got issues with BOB. Ever since I got the latest update, it just sticks at "Creating Statistics Table", and is greyed out, so I can't do anything with it until I turn it off. This is a sort of improvement from the last version which appeared to give some very strange numbers, although it worked at least.


*bump*

Re: BOB Bugs

Posted: Tue Nov 04, 2008 2:36 pm
by yeti_c
Sounds like you 2 have more than one version installed.

C.

Re: BOB Bugs

Posted: Wed Nov 05, 2008 12:32 pm
by cheekbones3
yeti_c wrote:Sounds like you 2 have more than one version installed.

C.


Nah, I always remove the old version. Just installed the latest update in fact, and it's still doing the same thing.

Re: BOB Bugs

Posted: Wed Nov 05, 2008 12:34 pm
by Frop
cheekbones3 wrote:
yeti_c wrote:Sounds like you 2 have more than one version installed.

C.

Nah, I always remove the old version. Just installed the latest update in fact, and it's still doing the same thing.

Does any other GM mod function? Did you try reinstalling GM yet?

Re: BOB Bugs

Posted: Wed Nov 05, 2008 12:56 pm
by cheekbones3
Ah, it seems there was a conflict with Robert's Mod. I'll leave that uninstalled.

Re: BOB Bugs

Posted: Wed Nov 05, 2008 2:28 pm
by yeti_c
cheekbones3 wrote:Ah, it seems there was a conflict with Robert's Mod. I'll leave that uninstalled.


"Roberts Mod"? What is that exactly? - You mean "Stocksr"? - He was the original author of BOB - AJAX BOB superseeds his version so yes it would cause conflicts.

C.

Re: BOB Bugs

Posted: Wed Nov 05, 2008 2:29 pm
by Frop
yeti_c wrote:
cheekbones3 wrote:Ah, it seems there was a conflict with Robert's Mod. I'll leave that uninstalled.


"Roberts Mod"? What is that exactly? - You mean "Stocksr"? - He was the original author of BOB - AJAX BOB superseeds his version so yes it would cause conflicts.

C.

So much for downward compatibility, Mr. Gates.

Re: BOB Bugs

Posted: Wed Nov 05, 2008 2:51 pm
by cheekbones3
Now you mention it, I'm not sure what it was doing! Ho hum.

Re: BOB Bugs

Posted: Sun Nov 09, 2008 11:33 am
by e_i_pi
In the 'Aggression' and 'Reinforcements' sections, all the numbers are showing up as zero. Has this been reported before, or is it just me?